Beeck Insil

New product

Beeck Insil is the Interior Mineral Paint coating from the Beeck Coating Systems. It is a ready-to-use interior silicate paint suitable for all firm interior substrates. It is easy to use, resistant to mould and free from solvents and creates a beautiful opaque, matt Finish. Can be tinted to 1000's of colour possibilities. Interior application only. 

More details


- +

Brand: Beeck

Product Info

Product Info:

Beeck Insil is the Interior Mineral Paint coating from the Beeck Coating Systems. It is ready-to-use and easy to apply and is suitable for coating all firm interior substrates. Beeck Insil dries to a beautifully matt finish and can be tinted to 1000's of colour possibilities. Can be used in both residential and commercial buildings alike. 

It also has naturally occurring mould resisting properties due to its alkalinity. Beeck Insil is free from Solvents, biocides and preservatives which is better for both your home environment and for the global environment too! This natural coating also allows walls to breathe and enhances valuable room climate properties which is especially important for older properties. 

Colour Selection:

Renosil Fine comes in a matt-mineral finish and is available in more than 300 absolutely non-fading mineral colour tones as produced in the BEECK colour range. The range is separated into Colour Groups 1-4.

Additionally, we are also able to tint this product to match your exact specification from any other colour chart or sample. Simply select ‘Tinted to your colour’ from the dropdown list and enter the reference code for the colour you want.

The UV resistance of mineral paints means that the colours do not fade and there shouldn’t be a discernible difference between buildings painted in the same colour at different times.

If you are unsure about your colour options or choice, we also have plenty of ideas to set the ball rolling in our colour section where we have added a number of widely used colour ranges. Or, alternatively, to discuss your options please call us on: 01179 511537

Suitable Substrates:

Unsuitable Substrates:

Technical Data
Application Brush, Roller or Spray
03.Drying Time (Recoat) 12 Hours
Smooth Coverage (m2 / litre) 0.13L per m2
Thinning 5-10% Water


9 other products in the same category:


Compare 0