Please note that due to the current Coronavirus situation, all Rust-Oleum products are subject to a 10 day lead time.
RustOleum Elastofill Elastic Jointing Paste
RustOleum Elastofill forms a rubber-like seal with permanently high elasticity (>900%) and will absorb strong expansion and deformation.
The Elastofill is waterproof and very resistant to; ageing, alkalies, weather and temperature variations.
Easy to apply with exceptional adhesion on a variety of surfaces.
- Sealing, Jointing, Filling, Fixing, and Glueing
- Recommended surfaces include; concrete wood, metal, glass, hard PVC, tiles, plaster, aluminium and bitumen.
The RustOleum Elastofill has a satin-gloss finish
Comes in 6 standard colour choices: Black, White, Grey, Beige, Brown and Clear.
Can be painted for long lasting waterproof durability.
For best results, ensure surfaces are thoroughly cleaned, degreased and lightly abraded.
Grind out fine cracks in a V-shape to around 0.5cm wide.
If depth is less than 1/2 the width, apply a back filling.
Prime any crack edges with Parafix, Pegafix or Vernac.
Hard PVC should be primed with Primer 44HS.
Metal and Glass to be primed with diluted Noxyde.
On Porous surfaces, always use an appropriate primer.
Apply by manual spray gun, spatula, palette knife, or glue spreader.
Joints have to be smoothed with a finger or with a cloth soaked in Thinner, or in water and soap.
The surface in contact with the air must be sufficiently large as the Elastofill will transform into a rubber like mass by the evaporation of water.
The RustOleum Elastofill will be touch dry in 3 hours, and re-coatable in 1 day.
Apply at a minimum temperature of 5 Degrees C.
Relative humidity 80%
Cleanup with water.
When dry, Elastofill can be removed mechanically, or softened with a synthetic thinner.
Remove by rubbing or scratching.