Rust-Oleum Metal Cladding Topcoat

New product

Don’t replace old and weathered cladding. Renovate with the Rust-Oleum Metal Cladding Rejuvenation Topcoat.

More details

We can tint this product to your exact specification from any colour chart or sample. Enter your chosen colour in the box below and click CONFIRM COLOUR before adding the product to your basket. Need help? Call us on 01793 511537




- +

Product Info

Please note that due to the current Coronavirus situation, all Rust-Oleum products are subject to a 10 day lead time.

Rust-Oleum Metal Cladding Topcoat is a waterborne, semi gloss finish with a high filling and hiding power.
It can be applied in one or two coats to almost any cladding system. Substrates include most synthetic materials such as powder coatings, polycarbonates and hard PVC as well as a range of metallic substrates including galvanizing, aluminium, copper, zinc and lead.

Easy to clean and to maintain
High filling and hiding power
Excellent flow out
Quick drying
Long lasting finish and excellent UV-resistance

Surface Preparation
Metal Cladding Topcoat can be applied directly on substrates primed with Metal Cladding Primer, NOXYDE or PEGANOX

Metal Cladding Primer and Topcoat can also be applied on old sound paintwork. Remove organic growth with AMW mould removal solution and degrease with ND14 cleaner degreaser and allow to dry thoroughly.
Abrade to create a key.

Application and Thinning
Brush, apply in 2 coats, if necessary dilute with water.
Roller, apply in 2 coats, use a short pile roller and if necessary dilute
with water.
Air-atomised spray, not recommended.
Airless spray, Nozzle, 018 / Pressure: 180 bars. 1 coat is sufficient in most cases.
If necessary dilute with water.

The product can remain a little sticky if it is used on new cladding

Technical Data
Coverage Smooth
Finish Satin gloss
Waterbased Yes
01.Drying Time (Touch Dry) 40 minutes
02.Drying Time (To handle) 4 hours
03.Drying Time (Recoat) 4 hours
04.Drying Time (Full cure) 2 days
Smooth Coverage (m2 / litre) 9-12
Type Single Pack
Application Method Brush, Roller, Spray
Product customization

We can tint this product to your exact specification from any colour chart or sample. If you know the reference please enter the code in the field below, click SAVE and add the product to your basket. We also have ideas to set the ball rolling in our Colour section where we have added a number of widely used colour ranges. Need help? Call us on 01793 511537

Enter your COLOUR REFERENCE in the box below:


* required fields


17 other products in the same category:


Compare 0