Renosil Silicate Paint System:
Renders Previously Coated with Non-mineral Paint

General Recommendations:

  • Before application of the Beeck paint system, ensure that the substrates are clean, dry, firm, stable and free from efflorescent and separating substances.

  • Carefully cover surfaces which are not to be treated- especially glass, ceramics, window sills, expansion joints, lacquer and anodic coatings – and protect the m from splashes.

  • Additionally do not use in: wet conditions, if there is a risk of frost, on hot surfaces or in the blazing sun.

  • Outdoor temperatures must be a minimum of +8˚C for application.

  • Protect fresh coatings from the rain by hanging up scaffolding sheeting in front of the substrate being worked on.

  • Allow for at least 12 hours drying time between coats.

  • Provide and wear personal protective equipment (PPE)

  • Always test the products on a small area before applying to entire surface.

Product Data Sheets:

Beeck Fungicide – PDS/TDS

Beeck Fixative – PDS/TDS

Quartz Filler – PDS/TDS

Renosil Fine – PDS/TDS


Compare 0