Rust-Oleum ND14 Cleaner Degreaser

New product

Clear grease, oil, proteins, dirt and many other contaminants. A high performance cleaner degreaser for metal mineral, coated and concrete surfaces. Use as a 5% dilution for best results.

More details


- +

Product Info

Please note that due to the current Coronavirus situation, all Rust-Oleum products are subject to a 10 day lead time.

Rust-Oleum ND14 Alkaline Cleaner/Degreaser is a concentrated, alkaline, non-flammable, virtually odour-free cleaning / degreasing solution to remove grease, oil, dirt and many other surface contaminants from coated, mineral and steel substrates.

Very effective cleaner and degreaser
Dilute with water for use
Can be used as an additive for high pressure cleaning

Application and Thinning
Scrape or sweep away grease, oil, dirt, mould and all other surface contaminations as much as possible.
ND 14 can be applied diluted or concentrated with a sponge, cloth, brush or broom.
For normal cleaning a 3 - 5% concentration will be sufficient.
The product should be diluted with cold water.
After use rinse with plenty of fresh water.
If a concentration of more than 5% is used, hot water rinsing is absolutely necessary.
As a high-pressure(steam) cleaning additive a 2% concentration is recommended.
After cleaning, remove any remaining water and allow the surface to dry, as moisture left on the surface or entrapped into pores may cause premature failure of the coating system. Large surface areas or poor drying conditions may require longer drying times before a coating system can be applied.

Technical Data
Coverage Smooth
Solvent Based Yes
Smooth Coverage (m2 / litre) 6-8
Type Single Pack
Application Method Brush, Sponge, Broom


12 other products in the same category:


Compare 0